Imagos Consulting
Embedded systems

Embedded systems development: firmware you can build a product on

Reliable firmware is what turns a clever prototype into a product you can ship. This is how we approach it.

Imagos Consulting · 21 November 2026 · 4 min read

The problem we solve

Hardware startups and growing product companies often have a working prototype and a problem: the code that runs on it was written to demonstrate an idea, not to be manufactured, updated and supported for years. Embedded skills are scarce, and a full-time hire may not be justified for a single product.

  • Firmware that is unreliable, hard to test or hard to hand over
  • Real-time requirements that the prototype only just meets
  • Hardware and software teams that do not yet work smoothly together
  • No safe way to update devices once they are in the field
  • A host application or user interface that must talk to the device reliably

Fixing these late is far more expensive than designing for them at the start.

Our approach

We treat firmware as engineering for the whole product life, not only for the first demonstration.

  • Start with requirements. Timing, power, memory, safety and update needs are written down and agreed first.
  • Choose the right foundation. We advise on processor choice and on whether bare metal or a real-time operating system suits the job.
  • Write maintainable code. Clear structure, hardware abstraction and automated tests make the code easier to extend and hand over.
  • Test on real hardware. Where possible we use hardware-in-the-loop testing and build the tools needed for production.
  • Connect the whole system. We build the host software and real-time interfaces that communicate with the device, including in .NET.

What you receive

  • Firmware source code, with hardware drivers and a board support layer
  • Communication protocols and a host application or interface, where needed
  • An automated test suite and test tooling
  • A secure update mechanism for devices in the field
  • Production test and programming tools, if required
  • Technical documentation covering architecture and build instructions

Typical project stages

Every project is different, but most follow this shape. Many clients begin with the first two stages only, so the early commitment stays small.

  1. Discovery. We review your product, your hardware and your timeline.
  2. Architecture. Requirements, the software design and key technology choices are agreed.
  3. Bring-up and prototype. Core hardware is made to work and the main functions are demonstrated.
  4. Development. Features are built and tested in iterations, with regular demonstrations.
  5. Verification. Testing under realistic conditions, including edge cases and failure handling.
  6. Production support and handover. Tools for manufacturing, documentation, and support after launch.
Your next step

Send us a short description of your product and its current state. We can review your prototype code or architecture and suggest the most useful first step.

Book a free 30-minute call

Talk through your project with us, with no obligation.

Book a call